2006 Honda TRX680 Rincon Factory Service Manual, Page 549Get this manual

2006 Honda TRX680 Rincon Factory Service Manual, Page 549

LIGHTSMETERSSWITCHES Measure the fuel level sensor resistance with the float at the top (FULL) and bottom (RESERVE) positionsFLOAT POSITION TOP (FULL) BOTTOM (RESERVE) RESISTANCE (20C68) 5-7Q 204210 FLOAT

TOP (FULL)

BOTTOM (RESERVE)

TEMPERATURE INDICATOR TEMPERATURE SENSOR
SYSTEM INSPECTION
NOTE: The coolantengine oil temperature indicator should come on for few seconds when the ignition switch is turned ON, and should extinguish shortlyCheck the neutral indicator and reverse indicator function properly If they do not function, check the powerground line (page 23-8) If they function, check as follows: FGA model shown: TEMPERATURE INDICATOR

Temperature indicator does not come on when the ignition switch turned to ON Seal the PCM con- Disconnect the Powertrain Control Module (PCM) nectors with tape to 33P connectorsprevent dirt and oil from entering the connector after disconnecting the 33P connectors