2006 Honda TRX680 Rincon Factory Service Manual, Page 542Get this manual
LIGHTSMETERSSWITCHES REPLACEMENT Remove the meter lower cover (page 3-18)Disconnect the accessory socket 2P (White) connector (page 23-5)Release the accessory socket wire from the wire clip on the steering shaft holderLoosen the nut and remove the accessory socket from the meter lower coverInstall new accessory socket by aligning the lug with the groove in the meter lower coverInstall the nut and tighten it securelyRoute the acces- Install the removed parts in the reverse order of
sory socket wire removalproperly (page 1-20)
IGNITION SWITCH
INSPECTION
Remove the right inner fender (page 3-9)Remove the ignition switch 4P (Natural) connector from the frame and disconnect itCheck for continuity between the switch side connector terminals in each switch positionContinuity should exist between the color coded wires as follows: 4P NATURAL CONNECTOR