2006 Honda TRX680 Rincon Factory Service Manual, Page 438Get this manual
BRAKE SYSTEM Install the brake arm, washer and parking nutTighten the parking nutTORQUE: 27 (2.8 kgf m, 20 Ibf ft) Install the return spring as shownBRAKE ARM
Coat new O-ring with silicone grease and install it into the sleeve piston grooveCoat new cup with silicone grease and install it onto the adjusting boltInstall the adjusting bolt into the sleeve pistonCoat the rod with silicone grease and install it into the sleeve pistonInstall the piston assembly in the caliper cylinder by aligning the pins of the piston with the holes in the caliperInstall bearing A, spacer, adjusting spring and spring guide onto the adjusting boltROD PISTON BOLT SPACER Install the snap ring using the snap ring pliersTOOL: Snap ring pliers 07914-SA50001 or 07914-3230001 SNAP RING GUIDE