2006 Honda TRX680 Rincon Factory Service Manual, Page 405Get this manual
REAR WHEELSUSPENSION SUSPENSION ARM INSTALLATION STABILIZER ARM AND LINK Install the stabilizer arm and bushings with the arm holders so the rounded side of the bushings are toward the frameTighten the four holder bolts alternately
Install with the Install the stabilizer links with new nuts and tighten
short threads into the stabilizer armthem
LINK NUT LOWER ARM Install new dust seals with the lip side facing out until the depth from the bushing end is 0.5 mm (0.02 in)Apply grease to the pivot bushings in the lower arm and install the pivot collarApply grease to the seal lips and install the seal caps over the dust seals securelyCOLLAR BUSHINGS 0.5 mm