2006 Honda TRX680 Rincon Factory Service Manual, Page 383Get this manual
FRONT WHEELSUSPENSIONSTEERING INSTALLATION Apply grease to the pivot collar outer surface and install the collar into the upper armApply molybdenum disulfide grease to the dust seal lips and install the dust seal caps onto the upper armgJifitM.1
DUST SEAL CAPS
Install the upper arm into the frame with the pivot bolt and new nut, and tighten the nut to the specified torqueTORQUE: 34 (3.5 kgf-m, 25 Ibf-ft) Install the shock absorber lower mount to the upper arm with the mounting bolt and new nut, and tighten the nut to the specified torqueTORQUE: 44 (4.5 kgfm, 32 Ibf-ft) Install and tighten the two new brake hose clamp bolts to the specified torqueTORQUE: 12 (1.2 kgf m, Ibf-ft) Install the lower arm into the frame with the pivot bolts and new nuts, and loosely tighten the nutsBOLTS ANDNUTS