2006 Honda TRX680 Rincon Factory Service Manual, Page 247Get this manual
ALTERNATORSTARTER CLUTCH Hold the torque limiter in vise with the special toolReplace the torque Check the slip torque with the special tool and limiter as an assem- torque wrenchbly
ATTACHMENT D
- TOOLS: Torque limiter attachment 07YMJ-MCF0200 (not available in U.S.A Torque limiter attachment 070MJ-HN80100 (not available in U.S.A STANDARD SLIP TORQUE: 5384 (5.48.6 kgf-m, 3962 Ibfft) LIMITER;ATTACHMENT B
STATORCKP SENSOR REMOVAL INSTALLATION
Remove the CKP sensor mounting boltsRelease the wire grommet off the alternator coverRemove the three bolts and alternator statorCKP sensor assemblyFor bearing replacement (page 11-11)STATOR BOLTS
IGNITION PULSE GENERATOR Install the statorCKP sensor assembly onto the alternator coverApply sealant to the wire grommet seating surface and install the grommet into the cover groove securelyInstall and tighten the stator mounting bolts to the specified torqueTORQUE: 10 (1.0 kgfm, Ibfft) Apply locking agent Install and tighten the CKP sensor mounting bolts to to the CKP sensor the specified torquemountmg bolt threadsT0RQUE