2006 Honda TRX680 Rincon Factory Service Manual, Page 198Get this manual
ENGINE REMOVALINSTALLATION Be sure the univer- Set the right lower mounting portion of the engine sal joint is not dis- between the hanger stays on the frameengaged
Install the mounting rubbers onto the right lower hanger bushing with the large I.Dside facing inInstall the spacer and the hanger bolt (from the front side) while aligning the bolt holes carefullyLoosely install the hanger nut
Install the mounting rubbers onto the left lower hanger bushing in the same manner as aboveInstall the hanger bracket and bolts, and the hanger bolt (from the front side) while aligning the bolt holes carefullyLoosely install the hanger nut
Install the mounting rubbers onto the upper hanger bushing in the same manner as aboveInstall the upper engine hanger bracket and the three boltsAfter installing all the mounting fasteners and seat them, tighten the fasteners in order as follows:left and right lower engine hanger nuts TORQUE: 54 (5.5 kgf-m, 40 Ibfft) left lower engine hanger bracket bolts upper engine hanger bracket bolts