2006 Honda TRX680 Rincon Factory Service Manual, Page 102Get this manual
MAINTENANCE
STEERING SYSTEM
Place the vehicle on level ground with the front wheels facing straight aheadMark the centers of the tires with chalk to indicate the axle center heightAlign the gauge with the marks on the tires as shown
TOE-GAUGE Slowly move the vehicle back until the wheels have turned 180 so the marks on the tires are aligned with the gauge height on the rear sideMeasure the toe on the rear part of the tires at the same points with no load on the vehicleToe-out: 10.9 15 mm (716916 in) NOTE Toe-out means the front measurement is greater than the rear measurementFRONT