2006-2014 Honda FourTrax ATV TRX250 EX TRX250X Service Manual, Page 306Get this manual
REAR DRIVING MECHANISM Apply liquid sealant to the mating surface of the gear case Install the case cover onto the case
It is important to turn the pinion gear while tightening the boltsIf the ring gear shim is too thick, the gears will lock after only light tightening
Apply locking agent to the threads of the 10-mm boltsInstall the bolts and tighten them in several steps until the cover evenly touches the caseThenwhile rotating the pinion gear, tighten the bolts to the specified torque in crisscross pattern in several stepsTORQUE: 10 mm bolt: '06 and '07: 49 N'm (5.0 kgfm, 36 Ibf.ft) After '07: 47 Nm (4.8 kgfm, 35 Ibfft) mm bolt: 25 Nm (2.5 kgfm, 18Ibfft)