2006-2014 Honda FourTrax ATV TRX250 EX TRX250X Service Manual, Page 265Get this manual
BRAKE SYSTEM
BRAKE FLUID REPLACEMENTAIR BLEEDING
BRAKE FLUID DRAINING
With the master cy linder reservoir parallel to the ground, remove the two screws, reservoir cap, set plate and diaphragmSCREWS
Connect bleed hose to the bleed valve Loosen the bleed valve and pump the front brake leverStop pumping the lever when no more fluid flows out of the bleed valve Perform above procedure for the other side bleed valve
BRAKE FLUID FILLINGBLEEDING
Close the bleed valves Fill the reservoir with DOT brake fluid from sealed containerFollow the manufacturer's opera ting instructions
Connect commercially available brake bleeder to the bleed valve Operate the brake bleeder and loosen the bleed valveIf not using an automatic refill system, add brake fluid when the fluid level in the reservoir is lowNOTE: