2006-2014 Honda FourTrax ATV TRX250 EX TRX250X Service Manual, Page 245Get this manual
FRONT WHEELSUSPENSIONSTEERING DISASSEMBLYASSEMBLY Loosen the lock nuts, and remove the ball joints and lock nuts from the tie-rodInstall the gold colored nut and unmarked ball joint on the flat (wrench holding position) side of the tierod, and the silver nut and "L" marked ball joint on the opposite sideLOCK NUT "L" MARK
BALL JOINT Note the reference distancesREFERENCE DISTANCES: A: 5.5 mm (0.22 in) B: 5.5 mm (0.22 in) difference between distances and should be mm (0.12 in) maxTighten these nuts after installing the tie-rod and adjusting the toe