2006-2014 Honda FourTrax ATV TRX250 EX TRX250X Service Manual, Page 188Get this manual
ALTERNATORISTARTER CLUTCH ALTERNATOR STATOR
Remove the wire grommets from the crankcase coverRemove the three bolts and stator
INSTALLATION
Install the stator onto the crankcase coverApply sealant to the seating areas of the grommetsRoute the wire properly as shown and install the grommets into the cover groove securelyInstall the three bolts and tighten them
Apply locking agent to the CKP sensor bolt threadsInstall the CKP sensor and tighten the two bolts, being careful not to pinch the wire
CONNECTOR
CKP SENSOR
TORQUE: N'm (0.61 kgfm, 4.4 IbUt)