2006-2014 Honda FourTrax ATV TRX250 EX TRX250X Service Manual, Page 178Get this manual
CLUTCHGEARSHIFT LINKAGE Lower the stopper arm with screwdriver and install the cam plate by aligning the pin hole with the dowel pinTighten the stopper arm bolt, be careful not to come off the cam plateTORQUE: 12 Nm (1.2 kgfm, 9Ibfft)
Install the thrust washer (small) onto the sub-gearshift spindle and insert the spindle from the rear crankcase side with the spindle arm facing the left
Install the thrust washer (large) onto the sub-gearshift spindleInstall the gearshift plate onto the cam plate and spindle with the stamp facing out as shownApply locking agent to the cam plate bolt threadsInstall the guide plate by aligning the tab with the groove in the cam plate