2006-2014 Honda FourTrax ATV TRX250 EX TRX250X Service Manual, Page 161Get this manual
CLUTCHGEARSHIFT LINKAGE Drive the spring pin from the chamfered hole side with 3-mm pin driver until the exposed height is mmMake sure the spring pin qoes not interfere crankcase cover by turning the lifer arm the
Hook one end of the spring over the spring pin securely and hook the other end against the cover lug as shown
Turn the lifter arm clockwise 1800 to apply load and align the cutout with the hole in the cover, then install the lifter piece into the lifter arm Release the lifter arm and be sure to seat the lifter piece in the cutout properlyInstall the front crankcase cover (page 10-30)