2006-2014 Honda FourTrax ATV TRX250 EX TRX250X Service Manual, Page 68Get this manual
MAINTENANCE OIL CHANGE Remove the oil filler cap
Remove the oil drain bolt and drain all oil from the gear caseInstall the oil drain bolt with new sealing washer and tighten itTORQUE: 12 N'm (1.2 kgfm, Ibfft) Fill the final gear case with the recommended oilRECOMMENDED OIL: Hypoid gear oil SAESO OIL CAPACITY: SO cm (2.7 US OZ, 2.Slmp oz) after draining 100 cm (3.4 US OZ, 3.5 Imp oz) after disassembly Check the oil level and add or drain oil if necessary (page 4-16)OIL DRAIN BOLT
BRAKE FLUID
Do not mix different types of fluid, as they are not compatible with each other Do not allow foreign material to enter the system when filling the reservoir Avoid spilling fluid on painted, plastic or rubber partsPlace rag over these parts whenever the system is servicedTurn the handlebar to the left side so the reservoir is level and check the fluid level through the sight glassNOTE: When the fluid level is low, check the brake pads for wear (page 4-18) low fluid level may be due to wear of the brake padsIf the brake pads are worn and the caliper pistons are pushed out, this accounts for low reservoir levelIf the brake pads are not worn and the fluid level is low, check the entire system for leaks (page 419)RESERVOIR CAP