2006-2014 Honda FourTrax ATV TRX250 EX TRX250X Service Manual, Page 50Get this manual
FRAMEBODY PANELSEXHAUST SYSTEM
REVERSE SELECTOR LEVER
DISASSEMBLY
Remove the two bolts and reverse selector lever assembly from the frame BOLTS
)REVERSE SELECTOR LEVER ASSEMBLY Remove the followingscrew lower cove -ring screw levershaft drum return spring case washer LEVERSHAFT
CASEAyR
DRUM a-RING SPRING
ASSEMBLY
Install the return spring onto the reverse selector- lever drum by aligning the end with the grooveLEVERSHAFT CABLE SCREW Pass the reverse selector cable in the case and conI WASHERnect its end to the drum CASE",i'Align the return Install the levershaft in the case and into the drum"spring end with the by aligning the shaft end with the slot in the drumslit in the case Install the screw and tighten itwhile installing the Coat new a-ring with oil and install it onto the drum in the casecase Install the lower cover onto the case by aligning the tab with the slotDRUM Install the screw and tighten itSPRING Install the reverse selector lever assembly onto the frame and tighten the two boltsCOVER