2006-2012 Honda TRX90 TRX90EX/X Service Manual, Page 218Get this manual
FRONT WHEEUBRAKESUSPENSIONSTEERING OISASSEMBLV ASSEMBL V Loosen the lock nuts and remove the ball joints and lock nuts from the tie-rodInstall the ball joint and silver nut on the flat (wrench holding area) side of the tie -rod, and the ball joint and gold nut on the opposite sideBALL JOINT Left-hand threads
LOCK NUT
The difference between the disranee should be
Adjust the tie-rod length so that the distance between each lock nut and thread end is 6.5 mm tance and dis (0.26 in)Hand-tighten the ball joint lock nutsless
3,0 mm 1012 m) or
A: 6.5 mm (0.26 in)