2006-2009 Honda TRX680 (TRX 680 FA-FGA) Factory Service Manual, Page 539Get this manual
LIGHTSMETERSSWITCHES
SERVICE INFORMATION
GENERAL
continuity test can be made with the switches installed on the vehicle All plastic connectors have locking tabs that must be released before disconnecting, and must be aligned when recon-
necting To isolate an electrical failure, check the continuity of the electrical path through the partA continuity check can usually
be made without removing the part from the vehicleSimply disconnect the connectors and connect continuity lester to the terminals or connections The following color codes are used throughout this section,