2006-2009 Honda TRX250EX/TRX250X Service Manual, Page 252Get this manual
FRONT WHEELSUSPENSIONSTEERING DISASSEMBLASSEMBL V loosen the lock nuts, and remove the ball joints and lock nuts from the tie-rodInstall the gold colored nut and unmarked bait joint on the flat (wrench holding position) side of the tierod, and the silver nut and "L marked ball joint on the opposite side
BAl JOINT
Note the reference dista ncesREFERENCE DISTANCES: A: 5.5 mm (0.22 in) B: 5.5 mm (0.22 in)
A difference between distances and should be mm (012 in) maxTighlen these nuts Temporarily tighten the lock nutsafter Installmg rhe rle-rooand adJusrmg the toe