2006-2009 Honda TRX250EX/TRX250X Service Manual, Page 233Get this manual
FRONT WHEELSUSPENSIONSTEERING Apply grease to the throttle cable end and connect the cable to the throttle armInstall the return spring and throttle arm onto the throttle lever by aligning the slotInstall the throttle arm nut with new lock washer and tighten itBend up the lock washer tab against the nutARM NUT
Insta ll new gasket, then install the throttle housing coverInstall and tighten the three screws TORQUE: 3.4 'm (0.35 kgfm2.5 Ibf.ft) Adjust the throttle lever freeplay (page 4-6)
FRONT WHEEL
REMOVAL
loosen the wheel nutsPlace the support block under the frame to raise the front wheels off the groundRemove the wheel nuts and front wheel