2006-2009 Honda TRX250EX/TRX250X Service Manual, Page 16Get this manual
GENERAL INFORMATION
STANDARD TORQUE VALUES
FA.STENER TYPE mm bolt and nut mm boll and nut mm bolt and nut 10 mm bolt and nut 12 mm bolt and nut
TORQUE _+: .m (kgf'mIbf.ft) (0.5, 3.71 10 (1.0, 7) 22 (2.2, 16) 34 (3.5, 25) 54 (5.5, 40)
TORQUE -,- ,"'", Nm Ibftt} mm screw (0.43.0) (0.9, 6.6) mm screw 10 (1.07) mm flange bolt (8 mm head, small ftangel 12 (1.2, 9) mm flange bolt (8 mm head, large flange) 12 (1.29) mm flange bolt (10 mm head) and nut 26(2.7, 19) rnm flange bolt and nUl 39 (4.0, 29) flange bolt and nut
ENGINEFRAME TORQUE VALUES
Torque specifications listed below are for important fasteners Others should be tightened to standard torque values listed aboveNOTE
1Apply locking agent to the threads2345678Apply engine oil to the threads and seating surfaceApply grease to the threads and seating surfaceApply brake fluid to the threadsAlOC bolt: replace with new onelock nut: replace with new oneCastle nut: tighten to the specified torque and further tighten until its grooves align with the coner pin holeStake