2005-2011 Honda Recon TRX250TE/TM service manual, Page 328Get this manual
BATTERYCHARGING SYSTEM CURRENT LEAKAGE INSPECTION Turn the ignition switch off and disconnect the negative battery cable from the batteryConnect the ammeter (+) probe to the ground cable-, and the ammeter probe to the battery termiAMMETER nalWith the ignition switch off, check for current leakageNOTE'
When measuring current using tester, sel it to high range, and then bring the range down 10 an appropriate lelelCurrent flow higher than the range selected may blowout the fuse in the
While measuring current, do not turn the ignition onA sudden surge of current may blowout the fuse in the testerSPECIFIED CURRENT LEAKAGE: rnA mallIf current leakage exceeds the specified value, shorted circuit is likelylocate the short by disconnecting connections one by one and measuring the current