2005-2011 Honda Recon TRX250TE/TM service manual, Page 308Get this manual
REAR DRIVING MECHANISM Install the ring gear with the shims into the gear
If IS Important tD
Install the case cover and lighten the bolts in several
rum the pinion steps until the cover evenly touches the gear casewhile tightening the Then, while rotating the pinion gear, tighten the bolts If the ring bolts to the specified torque in crisscross pattern gear shim ;s too in several stepsthICk, the g8a(S WIll loct after only ligh t
tightening
TORQUE: 10 mm bolt: 49 N'm (5.0 kgfm36 Ibfft) mm bolt: 25 N'm 12.6 kgfm, 19 Ibf.ft)
Remove the oil filler capRotate the ring gear several times in both directions