2005-2011 Honda Recon TRX250TE/TM service manual, Page 263Get this manual
REAR WHEELSUSPENSION Turn the inner race of the bearing with your fingerThe bearing should turn smoothly and quietlyAlso check that the outer race fits tightly in the housingRemove and discard the bearing if the races do not turn smoothly and quietly, or if they fit loosely in the housing, Replace the oil seal and bearing stopper ring if nec-
BEARING REPLACEMENT
Remove the oil sealDrive the bearing out of he left axle housing_
Drive the bearing into the housing wi th its sealed end facing in using the special tools to the specif ied depthUse the flat side of the attachmentBEARING DEPTH: 12.013.0 mm (0.470.51 in )