2005-2011 Honda Recon TRX250TE/TM service manual, Page 235Get this manual
FRONT WHEELSUSPENSIONSTEERING Inflate the tire and test the seal by dabbing small amount of cement around the plugEscaping air will cause bubble in the cementIf there is leakageremove the tire (page 13-6) and apply cold patch to the inside of the tire 85 describedIf plug has been inserted, trim it even with he inner tire surfaceTemporarily place rubber patch that is at least twice the size of the puncture over the injuryMake mark around the patch, slightly larger than the patch itselfRough the area marked inside the tire with tire buffer or wire brushClean he rubber dust from the buffed areaApply cement over the area marked and allow it to _'
dry until tackyDo not touch the cement with dirty or greasy handsRemove the lining from the patch and center it er the injuryPress the patch against the injury using special- , roller