2005-2011 Honda Recon TRX250TE/TM service manual, Page 66Get this manual
MAINTENANCE If there is no oil flow, remove the oil filler cap and add oil slowly through the oil filler hole until the oil starts to flow out of the oil check bolt holeRECOMMENDED OIL: Hypoid gear oil SAE II 80 Check for leaks if the oil level was low
Coat new Oring with grease and install it onto the oil filler capInstall and tighten the oil filler capTORQUE: 12 Nm 11.2 kgfm, 9Ibf.ft)
OIL CHANGE
Remove the oil filler cap and the drain bolt to drain all oil from the gear caseCheck that the drain bolt sealing washer is in good condition, replace if necessaryTighten the drain bolt to the specified torqueTORQUE: 12 Nm (1.2 kgfmIbf.tt)