2005-2011 Honda FourTrax Foreman TRX500 FE/FPE/FM/FPM/TM Service Manual, Page 102Get this manual
MAINTENANCE When the toe is out of specification, adjust it by changing the length of the tie-rods equally by loosening the lock nuts and turning the tie-rods while holding the ball joints
After adjusting each tie-rod, rotate both tie-rod ends in the same direction, along the tie-rod axis, until they stop against the ball joint stud
Using 17 mm or 22 mm wrench, hold the tie-rod ends so that the relative angle of both tie-rods may turn into 16 degrees 30 minutesThen, using suitable torque wrenchtighten the tie-rod lock nuts, making sure not to force the tie-rod ends against the bait joint studs