2005-2008 Honda ATV TRX500FA/FGA Fourtrax, Rubicon Factory Service Manual, Page 519Get this manual
HONDAMATIC Check the engine idle speed and adjust it if necessary (page 3-15)Adjust the TP sensor position so that the resistance between terminals and is 580 620and tighten the shear bolts until the bolt heads break offConnect the TP sensor connectorPerform the initial setting procedure (page 24-6)Install the removed parts in the reverse order of removalA (YellowBlack) TP SENSOR SHEAR BOLTS
B (GreenYellow)
ANGLE SENSOR
INSPECTION
SENSOR RESISTANCE Turn the ignition switch OFFDisconnect the angle sensor 3P connectorMeasure the resistance at the angle sensor 3P connectorConnection: Blackred (+) Greenyellow () Standard: 1.6 2.4 (20C68F) ANGLE SENSOR