2005-2008 Honda ATV TRX500FA/FGA Fourtrax, Rubicon Factory Service Manual, Page 505Get this manual
HONDAMATIC 7Angle Sensor Resistance Inspection Remove the angle sensor (page 24-41)Check that the resistance at the angle sensor terminal varies while turning the sensor jointConnection: Yellowblue (+) Greenyellow () Standard: to 1.6 2.4 (20C60F) Is there normal condition and standard resistance? No Faulty angle sensor After replacement, perform initial setting procedure (page 24-6) YES GO TO STEP 8GY YBu
8System Failure Reproduction Install the angle sensor and connect all connectorsTurn the ignition switch ONCheck the gear position indicatorIs the problem code blink indicated? NO No problem (Temporary failure) Erase the failure code (page 24-9) YES Faulty ECM After replacement, perform initial setting procedureGEAR POSITION INDICATOR