2005-2008 Honda ATV TRX500FA/FGA Fourtrax, Rubicon Factory Service Manual, Page 159Get this manual
ENGINE REMOVALINSTALLATION Install the mounting rubbers on the upper hanger bushing with the large I.Dside facing inInstall the upper engine hanger bracket and boltsAfter installing all the mounting fasteners and seat them, tighten the fasteners in order as followsTighten the left and right lower engine hanger nutsTORQUE: 54 Nm (5.5 kgfm, 40 lbfft) Tighten the left lower hanger bracket boltsTORQUE: 32 Nm (3.3 kgfm, 24 lbfft) Tighten the engine side upper hanger boltsTORQUE: 32 Nm (3.3 kgfm, 24 lbfft) Tighten the frame side upper hanger boltTORQUE: 54 Nm (5.5 kgfm, 40 lbfft) Install the universal joint boot onto the engineInstall the boot band and tighten the screw securelyUNIVERSAL JOINT BOOT BAND MOUNTING RUBBERS BRACKET BOLTNUT