2005-2006 Honda ATV TRX500FE/FM/TM FourTrax Foreman Factory Service Manual, Page 349Get this manual
REAR DRIVING MECHANISM Install the proper ring gear shims onto the ring gear and install them into the gear caseRING GEAR
SHIMS Apply liquid sealant to the mating surface of the case coverInstall the cover onto the gear case
CASE COVER Apply locking agent to the threads of the two 10 mm boltsIt is important to Install the bolts and tighten them several steps until turn the pinion the cover evenly touches the caseThen, while while tightening the rotating the pinion gear, tighten the bolts to the boltsIf the ring specified torque in crisscross pattern in several gear shim is too stepsthick, the gears will TORQUE: 10 mm bolt: 49 N-m (5.0 kgf-m, 36 Ibf-ft) lock after only light mm bolt: 25 N-m (2.6 kgf-m, 19 Ibf-ft) tightening