2001-2005 Honda TRX250EX Sportrax TRX250EX Factory Service Manual, Page 55Get this manual
MAINTENANCE
STEERING SHAFT HOLDER BEARING
Raise the front wheels off the ground and support the vehicle securelyCheck that the handlebar moves freely from side to side and the control cables do not interfere with the handlebar rotationIf the handlebar moves unevenlybinds, or has horizontal movement, inspect the steering shaft holder bushing and bearing (section 13)
STEERING SYSTEM
Place the vehicle on level ground with the front
wheels facing straight aheadMark the centers of the tires with chalk to indicate the axle center heightAlign the gauge with the marks on the tires as shown
Check the readings on the gauge scalesSlowly move the vehicle back until the wheels have
so the marks on the tires are aligned with TOEGAUGE