2001-2003 Honda TRX500FA Factory Service Manual, Page 256Get this manual
BRAKE SYSTEM Connect bleed hose to the bleed valve and leed the system as fo ll ow s: 1Squeeze the brake leve r, open the bleed valve 14 turn and then close itNOTE: Do not release the brake lever until the bleed alve has been closed 2Release the brake lever slowly and wait several sec-
onds after it reaches the end of its trave lRepeat the steps and until air bubbles appear in the bleed hose
Tighten the bleed valveTORQUE'm 10.6 kgfm 4.3 IbHt)
Perform air bleeding or he other side bleed valveFill the reservoir to he casting ledge with DOT or DOT brake fluid from sealed containerInstall the diaphragm, set plate and reser voir cap and tighten the screws,