2000-2003 Honda TRX350 Rancher factory service manual, Page 314Get this manual
LIGHTSMETERSSWITCHES
BULB REPLACEMENT
HEADLIGHT
T M models:
SCREW SLIT TAB
Remove the screw and the cover cap by releasing the tabs from the slits in the headlight coverRemove the dust cover from the headlightWhile pushing the bulb socket in, turn it counterclockwise to remove itRemove the bulb from the headlight and replace it with new oneInstall the removed parts in the reverse order of removal
Align the bulb tab with the headlight grooveInstall the dust cover tightly against the headlight with the T OP'' mark acing up
BULB DUST COVER
F M models:
Remove the screw and the cover cap by releasing the tabs from the slits in the headlight coverRemove the bulb socket by turning it counterclockwiseDisconnect the bulb connector and replace the bulb with new oneMake sure that the seal rubber on the connector is installed in position and is in good condition