2000-2003 Honda TRX350 Rancher factory service manual, Page 224Get this manual
BRAKE SYSTEM Connect bleed hose to the bleed valve and bleed the system as follows: 1Squeeze the brake lever, open the bleed valve 14 turn and then close it
BLEED HOSE
Do not release the brake lever until the bleed valve has been closedBLEED VALVE 2Release the brake lever slowly and wait several seconds after it reaches the end of its travelRepeat the steps and until air bubbles do not appear in the bleed hosePerform air bleeding for the other side bleed valveTighten the bleed valveTORQUE: Nm (0.6 kgfm4.3 lbfft) Fill the reservoir to the upper level line with DOT brake fluid from sealed containerInstall the diaphragm, set plate and reservoir cap and tighten the screwsTORQUE: Nm (0.2 kgfm1.4 lbfft) RESERVOIR CAP