2000-2003 Honda TRX350 Rancher factory service manual, Page 207Get this manual
FRONT WHEELSUSPENSIONSTEERING If the tie-rod ball joints were replaced, tighten the lock nuts as follows: Rotate both ball joints with the tie-rod axis until they stop against the ball joint studsHold them in that position and tighten the ball joint lock nutsTORQUE: 54 Nm (5.5 kgfm40 lbfft) Install new cotter pins into the ball joint studsLOCK NUTS
COTTER PIN
COTTER PINS
Do not twist or bend the brake hose and pipeRoute the wire and cable properlypage 1-22)
Install the handlebar assembly onto the steering shaft with new lower holder nuts and washersTighten the nutsTORQUE: 39 Nm (4.0 kgfm29 lbfft)