2000-2003 Honda TRX350 Rancher factory service manual, Page 193Get this manual
FRONT WHEELSUSPENSIONSTEERING Tighten the press head bolt until the reference mark on the press block is aligned with the top edge of the press headIf the rest of the bead cannot be pushed down into the center of the rim by hand, loosen the press head bolt and the lever nutRotate the breaker arm assembly and breaker press head assembly 18 to 14 the circumference of the rimTighten the lever nut and then tighten the press head bolt as describedRepeat this procedure as necessary until the remainder of the bead can be pushed down into the center of the rimAssemble the Universal Bead Breaker on the other side of the wheel and break the bead following the same proceduresRemove the tire from the rim using tire changer machine or tire irons and rim protectorsRemove the tire from the side of the rim that has the smallest shoulder area to simplify removalRIM BEAD BLOCKS REFERENCE MARK TOP EDGE OF PRESS HEAD