2000-2003 Honda TRX350 Rancher factory service manual, Page 181Get this manual
CRANKCASETRANSMISSIONCRANKSHAFT FRONT CRANKCASE COVER Remove the crankshaft end bearing with the special toolsTOOLS: Bearing remover set, 15 mm Bearing remover, 15 mm remover head remover shaft Remover weight CRANKSHAFT END BEARING
07936-KC10000 not available in U.S.A07936-KC10500 07936-KC10200 07936-KC10100 not available in U.S.A07936-371020A or 07936-3710200
W ear heavy gloves to avoid burns when handling the heated crankcase coverUsing torch to heat the crankcase cover may cause warpageF M model only:
Remove the output joint shaft (FMFE) and subgearshift spindle (TEFE) oil sealsHeat the crankcase cover 80C (176F) evenly using heat gun and remove the needle bearingsApply engine oil to new bearingsDrive the crankshaft end bearing in with the sealed side facing down using the special toolsTOOLS: Driver Attachment, 32 Pilot, 15 mm