2000-2003 Honda TRX350 Rancher factory service manual, Page 145Get this manual
CLUTCHGEARSHIFT LINKAGE MAINSHAFT AND CRANKSHAFT Measure the mainshaft O.Dat the clutch outer guideSERVICE LIMIT: 21.93 mm (0.863 in) Measure the crankshaft O.Dat the primary drive gearSERVICE LIMIT: 26.93 mm (1.060 in)
ASSEMBLY
Apply engine oil to the primary drive gear inner surfaceInstall the thrust washer and the drive gear onto the crankshaft
DRIVE GEAR
Coat new O-rings with engine oil and install them onto the feed oil pipeInstall the oil pipe into the crankcase with the two bolts and retainerApply molybdenum oil solution to the inner and outer surfaces of the clutch outer guideInstall the outer guide onto the mainshaft