2000-2003 Honda TRX350 Rancher factory service manual, Page 133Get this manual
9CLUTCHGEARSHIFT LINKAGE SERVICE INFORMATION TROUBLESHOOTING FRONT CRANKCASE COVER REMOVAL CENTRIFUGAL CLUTCH CHANGE CLUTCH 9-1 9-2 9-3 9-4 9-9 GEARSHIFT LINKAGE GEARSHIFT SPINDLE AND REVERSE STOPPER ARM FRONT CRANKCASE COVER INSTALLATION 9-15 9-17 9-18
SERVICE INFORMATION
GENERAL
This section covers service of the clutch (centrifugal clutch and change clutch) and gearshift linkageTo service the reverse stopper shaft and gearshift spindle, the engine must be removed from the frameThe crankcase must be separated when the sub-gearshift spindle, transmission, shift drum and shift forks require service (section 11)Engine oil viscosity and level and the use of oil additives have an effect on clutch operationOil additives of any kind are specifically not recommendedWhen the clutch does not disengage or the vehicle creeps, inspect the engine oil and oil level before servicing the clutch systemEngine lubricating oil from the oil filter is fed through the oil passages in the front crankcase coverClean the oil passages before installing the crankcase coverThe TEFE type is equipped with the electric shift program (ESP), refer to section 21 for this service