2000-2003 Honda TRX350 Rancher factory service manual, Page 129Get this manual
CYLINDERPISTON Measure the connecting rod small end I.DSERVICE LIMIT: 17.10 mm (0.673 in) Calculate the connecting rod-to-piston pin clearanceSERVICE LIMIT: 0.06 mm (0.002 in)
CYLINDER STUD BOLT REPLACEMENT
Remove the stud bolts from the cylinderInstall new stud bolts in their proper positions and tighten themA: 10 B: 10 166 mm stud bolt 206 mm stud bolt
B 195 161 mm
TORQUE: 12 Nm (1.2 kgfmlbfft) After installation, measure the stud height from the cylinder surfaceSPECIFIED HEIGHT: A: 161 B: 195 mm (6.3 mm (7.7 0.04 in) 0.04 in)
Adjust the stud height if necessary