2000-2003 Honda TRX350 Rancher factory service manual, Page 88Get this manual
FUEL SYSTEM FLOAT AND JETS Damage to the pilot screw seat will occur if the pilot screw is tightened against the seatHandle the jets with careT hey can easily be scored or scratched
NEEDLE JET HOLDER RUBBER PLUG
MAIN JET
Install the pilot screw with the spring, washer and new O-ring and return it to its original position as noted during removalPerform the pilot screw adjustment if new pilot screw is installedInstall the following: needle jet needle jet holder main jet slow jet starter jet rubber plug Hang the float valve onto the float arm lipInstall the float valve and floatInstall the float pin as shownInstall the baffle plate
PILOT SCREW STARTER JET SLOW JET NEEDLE JET
T ap the loat pin gently with suitable pinO.D2 mm)
BAFFLE PLATE FLOAT PRESS FIT SIDE