2000-2003 Honda TRX350 Rancher factory service manual, Page 82Get this manual
FUEL SYSTEM
CARBURETOR REMOVAL
Remove the following: side covers (page 2-4) air cleaner housing (page 5-3) Place and approved fuel container under the drain tubeLoosen the drain screw and drain the carburetorRelease the carburetor heater wire from the clip and disconnect its connector
TEFE type shown: HEATER WIRE CLIP
CONNECTOR
Disconnect the fuel tubeLoosen the starting enrichment (SE) valve nut
FUEL TUBE
SE VALVE NUT
Remove the screw and the throttle drum coverLoosen the insulator band screw and remove the carburetor off the insulator