2000-2003 Honda TRX350 Rancher factory service manual, Page 40Get this manual
FRAMEBODY PANELSEXHAUST SYSTEM
REMOVAL
Unlock the seat by turning the release lever upwardPull the seat back and remove it
BOSSES LEVER
SEAT HOOK
INSTALLATION
Install the seat by inserting the hook between the screw and fuel tank and the prong into the seat retainer of the framePush the seat forward and align the mounting bosses with the mounting rubbers, then press down to lock it
SIDE COVER
Remove the seatRemove the following: carburetor air vent hose (from clips on side covers) recoil starter cover (release boss and tabs) five trim clips side cover (release three tabs of fender by sliding cover forward and front mounting portion of cover by pressing it inward) Installation is in the reverse order of removalRoute the air vent hose properly (page 1-22)RUBBERS RETAINER