1999-2004 Honda TRX400EX FourTrax Service Manual, Page 180Get this manual
FRONT WHEELlSUSPENSlONlSTEERlNG Install the tie-roo into the steer ng shaft and knuckles with the flat lwrench holding point1 side facing the knuckleInstall the joint nuts and tighten them by holding the joint stud flat surfaces
TORQUE 44 N.m 14.5 kgf.m, 33 IbfW
If the ball joints were replaced, tighten the lock nuts following procedure: Rotate both ball joints with the tie-rod axis until they stop against the ball joint studsHold them in that position and tighten the ball joint lock nuts
TORQUE: 54 15.5 kgfm, 40 Ibf4t)