1999-2002 TRX400EX Fourtrax Service Manual, Page 84Get this manual
ENGINE REMOVALINSTALLATION Install the removed parts from engine removal procedure (page 6-2 to 6-3) in the reverse order or removalTORQUE: Gearshift pedal pinch bolt: 20 N-m (2.0 kgfm, 141bf.ft) NOTE: Route the wires, cables and tubes properly (page 1-18) When installing the gearshift pedal, align the punch marks on the pedal and spindle When installing the drive sprocket, install with the "OUT SIDE" mark facing outSet the fixing plate into the countershaft groove and move it to align the bolt holes in the plate and sprocketthen tighten the boltsInstall the following:oilpipes (page 4-7)brake pedal (page 14-20) -exhaust system (page2-6)carbu retor assembly (page 5-12)fuel tank and heat protector (page 2-41 Perform the following adjustments:drive chain (page 3-13)clutch cable (page 3-17)th rottlecable (page 3-4) Fill with engine oil (page 3-9)