1998-2004 Honda Foreman 450 factory service manual, Page 326Get this manual
FRONT DRIVING MECHANISM DRIVE PINION DISASSEMBLY ASSEMBLY ('98'01) Pull the bearing off the shaft with commercially available bearing pullerRemove the pinion adjustment spacer
To reassemble, first install the pinion spacerNOTE: When the gear set, pinion bearing andor differential case has been replaced, use 2.0 mm W.08 in) thick spacer
BEARING
PINION GEAR Apply #80 gear oil to the bearingDrive the bearing onto the drive pinion with its groove side facing out using the special tools as shownDRIVER40 mm I.D