1998-2004 Honda Foreman 450 factory service manual, Page 319Get this manual
FRONT DRIVING MECHANISM Remove both differential caps and clutch pack assemblies (page 15-23)Inspect the clutch pack assemblies (page 15-24)Then, insta ll one of the differential caps onto its clutch pack assemblyCheck the slip torque on the reassembled clutch pack using the procedu re specified aboveIf the slip torque is out of specification, the clutch spring seat is wornRemove the inspection tools Remove the differential cap and the clutch pack from the differentialSelect clutch spring seat of the required thicknessIf the slip torque is below specification, replace the spring seat with thicker oneIf the slip torque is above specification, replace the spring seat with thinner oneSelect the clutch spring seat from the list belowA: 1.0 mm (0.039 B: 1.2 mm (0.047 C: 1.4 mm (0.055 D: 1.6 mm (0.063 E: 1.8 mm (0.071 in) in) in) in) in) CLUTCH SPRING SEAT