1998-2004 Honda Foreman 450 factory service manual, Page 244Get this manual
FRONT WHEELSUSPENSIONSTEERING Once the tool is in place, turn the adjusting bolt as necessary to make the jaws parallelThen hand-tighten the pressure bolt and recheck the jaws to make sure they are still parallelTighten the pressure bolt with wrench until the ball joint shaft pops loose
PRESSURE BOLT
ADJUSTING BOLT
Remove the knuckle from the upper and lower arm, using the special tool according to the above instructionsTOOL:
Ball joint remover, 28 mm
Remove the castle nuts
07MAC-SL00200