1998-2004 Honda Foreman 450 factory service manual, Page 225Get this manual

1998-2004 Honda Foreman 450 factory service manual, Page 225

CRANKSHAFT BALANCERTRANSMISSION Install the reverse idle gear aligning the pin on the shaft with the crankcase grooveInstall the washer
Install the C1 gear bushing making sure oil passages are aligned, C1 gear and copper washer
CRANKSHAFT IBALANCER
REMOVAL
Remove the transmission (page 11-4)Remove the crankshaft and balancer from the rear crankcase using hydraulic press
If the rear crankshaft bearing remains on the crankshaft, remove it with commercially available bearing separator (4 12 in) as shownIf the bearing remains in the rear crankcase, drive it out from the outsideDiscard the rear crankshaft bearingNOTE:

Back to 1998-2004 Honda Foreman 450 factory service manual